Technology Data Centers Solutions Case Studies About Blog Request a Quote
Adiabatic Precooling Technology

Peak
Performance
Starts Here

Peak+ manufactures adiabatic precooling systems for air-cooled chillers and dry coolers — delivering up to 30% compressor energy reduction and 6–15% PUE improvement for mission-critical data centers worldwide.

Explore Technology → View Case Studies
30%
Energy Reduction
6–15%
PUE Improvement
$80K+
Annual Savings
12+
Enterprise Clients
Trusted By
Microsoft AWS Iron Mountain Vantage QTS Databank Aligned STACK Flexential CloudHQ Sabey H5
The Science

How Adiabatic Precooling Works

Peak+ system cross-section showing hot air entering and cool air exiting the precooling unit
25.5°F
Average Temperature Reduction
01
Hot Ambient Air Enters
On peak summer days, condenser inlet temperatures reach 140°F, forcing compressors to maximum stress and risking costly failures.
02
Controlled Evaporation Activates
The Peak+ filter media uses controlled evaporation to cool incoming air. Water is fully evaporated or contained — zero humidity is transferred indoors.
03
Cooled Air Boosts Efficiency
Air cooled to ~104.5°F enters the condenser coil, reducing compressor head pressure and energy use by up to 30%, while extending equipment life.
04
24/7 NOC Monitoring
Our cloud-based Network Operations Center monitors every unit in real time, delivering verified savings reports and continuous performance optimization.
Key Advantages

Built for Mission-Critical Performance

30%
Energy Savings
Reduce compressor energy consumption during peak demand periods, directly lowering your utility bill and carbon footprint.
6–15%
PUE Reduction
Improve Power Usage Effectiveness on design days, unlocking additional IT load capacity and increasing revenue potential.
0
Compressor Failures
Multiple clients went from 9+ compressor failures per year to zero after installing Peak+, dramatically reducing maintenance costs.
0%
Humidity Transfer
Patented filter media design ensures all water is evaporated or contained — never transferred to indoor air or condenser coils.
Fast
Magnetic Installation
Attaches magnetically to existing HVAC units for rapid, non-invasive installation. Approved by major HVAC OEMs including Trane.
$300K
Utility Rebates
Peak+ qualifies for rebates with most electric utilities. We've secured over $300,000 in rebates for a single client — up to 50% of project cost.
Solutions

New Design & Retrofit

Whether you're designing a new facility or optimizing an existing one, Peak+ delivers compelling value at every stage.

New Design

Optimize From the Ground Up

Integrate Peak+ into your new data center design to solve CFD challenges before they become operational problems, and maximize ROI from day one.

  • →Solve failing external CFDs before construction
  • →Increase revenue by lowering peak PUE
  • →Control ambient air temperatures on design days
  • →Capture utility rebates for demand reduction
Retrofit

Revitalize Existing Infrastructure

Extend the life of aging equipment, resolve reliability issues, and achieve significant energy savings without a full HVAC replacement.

  • →Resolve HVAC reliability and tripping issues
  • →Increase efficiency through lower PUE
  • →Extend compressor and condenser coil life
  • →Increase capacity of aging equipment
Before Peak+
140.0°F
Peak+ Reduces By −25.5°F
After Peak+
104.5°F
CFD Performance

Take Control of Entering Air Temperatures

Peak+ eliminates the risk of failing external CFDs by dramatically reducing condenser inlet temperatures on the hottest design days.

Data center design is predicated on theoretical worst-case conditions. The entire site must be engineered to withstand ambient air temperatures that may only occur for a handful of hours during summer. Peak+ mitigates this inefficiency, unlocking electrical capacity for highly-lucrative IT load.

Learn the Technology →
Global Reach

Peak+ Installations Worldwide

From hyperscale campuses to enterprise data centers, Peak+ is deployed across critical facilities worldwide.

Validated Results

Proven in Critical Facilities

Data Center
0
Compressor Failures (vs. 9/year)
Private Data Center
A 3,310-ton air-cooled facility eliminated compressor failures entirely. Overall HVAC energy dropped 25% and PUE improved from 1.60 to 1.45 during summer months.
📍 Southern California, USA
Commercial
$300K
Utility Rebate Secured
Riata Trace Complex
Peak+ delivered 978 kW of demand reduction — 98% of forecasted savings — and secured a $300,000 utility rebate from Austin Energy, covering half the project cost.
📍 Austin, Texas
Enterprise
$80K
Annual Cost Reduction
Verizon Data Center
"Peak+ lowered one of our data center's annual operating cost by $80,000; it quickly paid for itself." Rapid ROI with zero operational disruption to this mission-critical facility.
📍 United States
View All Case Studies →
Client Feedback

What Our Clients Say

"

Peak+ lowered one of our data center's annual operating cost by $80,000; it quickly paid for itself.

Phillip Shatter
Verizon
"

We selected Peak+ to help achieve our sustainability goals. Peak+ drastically cut our energy consumption by 40,000 kilowatt hours, and thus, our carbon footprint.

Mark D'Ambrosi
Summit Properties
"

We installed Peak+ to ensure our HVAC units remained on-line during hot summer days. This was an investment for our tenants to ensure all day, reliable comfort.

Kim Cart
LBA Realty

Ready to Reduce Your
Peak PUE?

Join 12+ leading data center operators who trust Peak+ to deliver measurable energy savings, improved reliability, and a lower carbon footprint.

Request a Quote → Learn the Technology